1、濟南汽車音響改裝http://www.szanyuda.com/介紹對于金屬彈簧片故障的修復,可先將銹蝕部分用刀片輕輕刮去,再用無水酒精清洗擦拭干凈即可,金屬彈簧片也可以自制,選一塊厚度相當、彈性良好的黃銅薄片,最好是磷銅片,剪成與原來相同的形狀,安裝或者焊上即可。
Jinan introduced for car audio conversion sheet metal spring fault repair, rust can be first part gently scrape with a razor blade, then wipe clean ethanol wash, metal spring sheet can also be made, the election of a considerable thickness and good elasticity brass sheet, preferably phosphor bronze sheet, cut into the same shape as the original, can be installed or welded on.
2、濟南汽車音響改裝介紹對于導電橡膠故障的修復,如果只是灰塵,可用純凈水清洗,如果有油污可用無水酒精清洗;若不能恢復,再用刀片將涂層輕輕刮去薄薄的一層,然后用鉛筆,最好是2B的,在觸點表面涂抹以增加導電性。
Jinan car audio conversion introduction of conductive rubber for fault repair, if only dust, use pure water cleaning, if there is oil available anhydrous alcohol to clean; if it can not recover,and then gently scrape blade coating a thin layer, then with a pencil, preferably 2B, and in order to increase the contact surface smear conductivity.
3、濟南汽車音響改裝http://www.szanyuda.com/介紹修復導電橡膠的方法是,找張香煙盒中的錫紙,剪成與原來相同的形狀,再在錫紙的紙質面上及原導電橡膠處涂上一層萬能膠,把錫紙貼在導電橡膠上,注意錫紙面一定要朝向線路板,壓實后即可使用。
Jinan introduce modified car stereo repair conductive rubber method is to find Zhang cigarette box of tin foil, cut the same shape as the original, and then coated with a layer of foil-purpose adhesive on the surface of the paper and the original place of conductive rubber, the foil attached to the conductive rubber, attention must foil surface facing the board, can be used after compaction.
推薦汽車音響改裝案例
推薦汽車音響知識
- 如何改裝汽車音響及改裝的安裝標準
- 濟南汽車音響改裝談音響防水措施
- 汽車音響改裝后應該如何護理?
- 濟南汽車音響分析調音小技巧
- 濟南汽車音響改裝店分析噪音的跟蹤與排除
- 濟南汽車音響升級介紹如何判斷喇叭安裝是否專業?
- 濟南汽車音響的功放的額定功率大小不一樣會咋樣
- 濟南汽車音響改裝功放功率要大于喇叭功率
- 濟南汽車音響噪音來源的分析和處理
- 純粹原音 如臨現場— 丹麥·丹拿(DYNAUDIO)——濟南孚卡悅聽丹拿授權代理商
- 濟南汽車音響改裝店從哪些方面可以判斷汽車隔音效果的好壞
- 濟南汽車音響改裝要維護好原車電路
- 如何正確使用濟南汽車音響碟片?
- 汽車音響該怎樣保養才合理?
- 濟南汽車音響改裝向大家介紹音響試聽
- 做濟南汽車隔音效果好嗎?
- 濟南汽車音響改裝中安裝功放能否改善音色
- 濟南汽車音響車用電器如何改裝?
- 做了汽車隔音跟沒做隔音有啥區別?
- 汽車音響擴聲系統中的音箱系統各種布置方式的優缺點分